enginehistory.org Forum Index enginehistory.org
Aircraft Engine Historical Society Members' Bulletin Board
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Packard Merlin boost regulator

 
Post new topic   Reply to topic    enginehistory.org Forum Index -> British Engines
View previous topic :: View next topic  
Author Message
gbaddeley



Joined: 03 May 2011
Posts: 2

PostPosted: Mon May 09, 2011 04:50    Post subject: Packard Merlin boost regulator Reply with quote

Hi all;

A friend of mine is working on a flightsim project and he has asked me about the operation of the boost regulator on a V-1650-7. We have a copy of the engine manual, but it doesn't go into the kind of detail that we need. So, I have joined AEHS in the hope that there are some members with this kind of in-depth knowledge.

So, here we go, the questions are verbatim as received;

First question: The relay piston as far as I can understand from several manuals is retained to the forward position with the spring, until pressure difference between blower inlet and outlet is insufficient for reliable operation. This position corresponds to maximal reverse effect of the relay piston to the butterfly valve (BV). If engine rpm grow then the piston gets controlled and travels aft opening BV even if the throttle lever does not move. If so, what is rpm value when this transition occurs? Is it noticable?

Second question: The second Q is about emergency boost. As far as I can see it is done by opening the extra port form the pressure chamber to depression area so the pressure is determined by incoming and outgoing air. So the pressure measured becomes lower than true MP and the boost regulator force it obtaining emergency boost.
Is it correct?



Many thanks in advance to anyone able to give me some insight!

All the best;

Greg
Back to top
View user's profile Send private message
dbirch
Guest





PostPosted: Sat Aug 27, 2011 12:02    Post subject: Merlin Automatic Boost Control Reply with quote

Greg,

In the event that you have not had a reply to your query, I have a description of how it all works. Will scan the pages next week and send to Kim to put on to apropriate section of website.


Dave Birch
Back to top
kmccutcheon



Joined: 13 Jul 2003
Posts: 298
Location: Huntsville, Alabama USA

PostPosted: Fri Sep 02, 2011 10:44    Post subject: Reply with quote

The Rolls-Royce Merlin Automatic Boost Control article is available for viewing at
http://www.enginehistory.org/Piston/Rolls-Royce/R-RmerlinABC/R-RmerlinABC.shtml
_________________
Kimble D. McCutcheon
Back to top
View user's profile Send private message Visit poster's website
dirwin



Joined: 21 Aug 2010
Posts: 13
Location: West Sussex, England.

PostPosted: Sun Sep 04, 2011 14:17    Post subject: Reply with quote

The above article provides the clearest overview of the boost control mechanism of the Merlin that I know of. It is clear, concise and identifies the operational variables that the boost control mechanism accommodates by design.

It is the appendix of an RR document called "Instructors notes on engine handling in flight'; a high level guide that also covers airscrew variable pitch, range/fuel consumption and other flight mode considerations on engine operation.

Greg's question relates to V1650-7; I have found that the 'V1650-3/-7 service manual' provides a better description of the boost mechanism than the 'V1650-3/-7 overhaul manual'. However the RR document above is the best overview guide of all.

DAI
Back to top
View user's profile Send private message
gbaddeley



Joined: 03 May 2011
Posts: 2

PostPosted: Thu Sep 08, 2011 12:36    Post subject: Reply with quote

Very many thanks guys;

I have to admit that some of the stuff is way over my head, as we just deal with the oily bits rather than the theory. I'll pass this on to my colleage and thanks again to everyone!

All the best

Greg
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    enginehistory.org Forum Index -> British Engines All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group