enginehistory.org Forum Index enginehistory.org
Aircraft Engine Historical Society Members' Bulletin Board
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

V-1650-19, additional info needed

 
Post new topic   Reply to topic    enginehistory.org Forum Index -> British Engines
View previous topic :: View next topic  
Author Message
jjuutinen



Joined: 13 Jul 2003
Posts: 180

PostPosted: Fri Jul 01, 2005 09:56    Post subject: V-1650-19, additional info needed Reply with quote

Is there any in-print source for thorough description of the V-1650-19 with its Sundstrand infinitely variable blower gearing? Did RR itself contruct test engines with such a feature?
Back to top
View user's profile Send private message
gwhite



Joined: 13 Jul 2003
Posts: 58

PostPosted: Sat Aug 20, 2005 14:59    Post subject: Reply with quote

Merlin V-1650-19
12.0/110.1 5.0 to 8.3 .479:1 +19-3/4 -Supercharger gear ratio variable between the limits given
(American built Merlin)
No production
Quote from R-R literature
Back to top
View user's profile Send private message
jwells



Joined: 16 Sep 2003
Posts: 57
Location: Victoria, AUSTRALIA

PostPosted: Wed Jun 28, 2006 23:05    Post subject: Packard Merlin V 1650-19 supercharger. Reply with quote

U.S. patent No 2,485,503 granted to long serving Packard engineer, Herbert L. Misch appears to cover the design of the Sundstrand variable speed supercharger for the V 1650-19 engine.

The two impellers were put onto separate shafts and only the first-stage was capable of infinite variability via a large epicyclic gear as a primary drive and the usual, doughnut-shaped Fottinger coupling, fluid drive units providing extra drive. The second stage impeller was the normal Packard two-speed mechanical drive using Wright Aero-type epicyclic gears in the layshafts.

The extra complexity of the design was considerable. It would be great to read the report on the tests done on the two engines fitted with the device.

Jerry W.
Back to top
View user's profile Send private message
dbirch
Guest





PostPosted: Thu Dec 13, 2007 03:32    Post subject: Reply with quote

Despite Rolls-Royce interest in this idea, it never tried it out on one of its engines. One of the negative aspects was that you needed a larger oil cooler to dissipate the extra heat generated.

Dave Birch, RRHT
Back to top
gwhite



Joined: 13 Jul 2003
Posts: 58

PostPosted: Thu Dec 13, 2007 08:44    Post subject: Reply with quote

Two-stage R-2800s used this system, i.e., the main (2nd) stage being a fixed speed and the auxiliary (1st) stage being variable speed via a fluid coupling. These included -8s (F4U-1), -10s (F6F Hellcat and early P-61), -32W (F4U-5) and -18W (F4U-4). The first stage “coasted” until the critical altitude was reached, typically 12 – 14,000 feet when the auxiliary stage was engaged offering a ceiling of over 30,000 feet. Two-stage 4360s used a similar system. This gave a very elegant solution to the varying requirement at varying altitudes. Down side being, as Dave pointed out, that more heat was rejected into the oil but only when the aux stage was in operation.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    enginehistory.org Forum Index -> British Engines All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group