![enginehistory.org Forum Index](templates/subSilver/images/logo_phpBB.gif) |
enginehistory.org Aircraft Engine Historical Society Members' Bulletin Board
|
View previous topic :: View next topic |
Author |
Message |
rmarks
Joined: 23 Jul 2021 Posts: 1
|
Posted: Fri Jul 23, 2021 22:37 Post subject: Bendix carburetor PR series size |
|
|
What does the 58 mean in the PR series PR-58 mean for size of throat?
The Bendix/Stromberg carburetor article explains the other series' quite well, but the PR throats are rectangular, not round, and the numbers are about 4 times lager than almost as big round throat units. So, the PR series must use a different designation system.
It would be nice to know what the throat areas are.
Does anyone know how this series designations were arrived at?
Thanks.
ron |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kmccutcheon
![](images/avatars/373.jpg)
Joined: 13 Jul 2003 Posts: 298 Location: Huntsville, Alabama USA
|
Posted: Sat Jul 24, 2021 04:57 Post subject: Re: Bendix carburetor PR series size |
|
|
rmarks wrote: | What does the 58 mean in the PR series PR-58 mean for size of throat |
The number 58 represents the number of square inches of throat opening. Please see
https://www.enginehistory.org/Carbs/CarbApps.xls _________________ Kimble D. McCutcheon |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|