enginehistory.org Forum Index enginehistory.org
Aircraft Engine Historical Society Members' Bulletin Board
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Brownback Tiger C-400

 
Post new topic   Reply to topic    enginehistory.org Forum Index -> Collections/Restorations - General
View previous topic :: View next topic  
Author Message
lmoretti



Joined: 13 Jul 2003
Posts: 13

PostPosted: Wed Nov 19, 2003 13:14    Post subject: Brownback Tiger C-400 Reply with quote

Would anybody have any data or drawings for the Brownback Tiger C-400 engine?
It is a static six-cylinder twin-row radial built in the late Twenties by the Light Foundry and Manufacturing Company of Pottstown, PA.
It was designed by Mr. Brownback, based on a development of the Anzani six cylinder engine.
It runs a couple of Bosch FU6BRS89 magnetos and a Stromberg NAR3 carburetor.
What I am most interested in is drawings of the crankshaft counterbalances.
(By the way, I already checked out NASM and EAA).
NASM has one such engine and it seems hard to get one's hands on it for evaluation, so if anybody has a manual for the engine, I would be glad to obtain copies.
Thanks and best regards,
Luigi U. Ricci Moretti

P.S.: Dr. Jeremy Kinney, of the NASM, was kind enough to arrange for a visit. Borescoped the whole thing and got some good information on it. More to follow.


Last edited by lmoretti on Mon Apr 05, 2004 16:41; edited 1 time in total
Back to top
View user's profile Send private message
UAHArchives



Joined: 13 Jul 2003
Posts: 4

PostPosted: Tue Dec 02, 2003 22:39    Post subject: Reply with quote

Yes I have some drawings and an artical on the Brownback. rloftis
Back to top
View user's profile Send private message
lmoretti



Joined: 13 Jul 2003
Posts: 13

PostPosted: Mon Apr 05, 2004 16:39    Post subject: Counterbalances Reply with quote

I gave up trying to copy them since I could not lay my hands on an original and just redesigned them from the cross sectional drawing of the engine I had in a brochure.
The missing dimensions were determined analytically, based on the formulas provided in the book by Angle (Engine Dynamics and Crankshaft Design).
I weighed all reciprocating masses first.
I used SolidWorks to determine the volume and, by selecting different materials I was able to use the mass properties function to compute the weight and CG (It turned out to be aluminum bronze).
I'd love to post an isometric view of the crankshaft and counterbalaces (needed the crankshaft model to match the mounting screw holes), but have no idea on how to do that.
I am now going to get them machined.
Bye,
Luigi
Back to top
View user's profile Send private message
kmccutcheon



Joined: 13 Jul 2003
Posts: 298
Location: Huntsville, Alabama USA

PostPosted: Wed Apr 07, 2004 15:45    Post subject: Reply with quote

>>I'd love to post an isometric view of the crankshaft and counterbalaces

The crankshaft assembly drawing can be viewed at
http://www.enginehistory.org/Misc/BrownbackC-400/C-400CrankAssy.jpg


A copy of a US patent drawing that I believe covers components of this engine can be viewed at:
http://www.enginehistory.org/Misc/BrownbackC-400/1783698.pdf
_________________
Kimble D. McCutcheon
Back to top
View user's profile Send private message Visit poster's website
lmoretti



Joined: 13 Jul 2003
Posts: 13

PostPosted: Tue Apr 12, 2011 11:39    Post subject: New crankshaft Reply with quote

After finding a crack in the prop hub keyway, it was necessary to REBUILD a NEW crankshaft for my 1929 Brownback Tiger C400 engine.
Something that had not happened since 1929.
Thanks to R&R Industrial Services Ontario, CA, a beautiful new crank was cut from a massive 4340 block to .0005 tolerance.
Now it is just a matter of reassembling and running.
If I remember how to post pictures I will put a few selected ones up for your enoyment.
Back to top
View user's profile Send private message
lmoretti



Joined: 13 Jul 2003
Posts: 13

PostPosted: Fri May 25, 2012 09:23    Post subject: Update Reply with quote

It must be nearly ten years that I have been going at this and it should be on short finals.
The engine has a new crankshaft, as I wrote last year, and is now back together.
Should run on the test stand within June.
Pictures: http://www.enginehistory.org/BBimages/BrownbackC-400/index.html
By now, since Ralph Graham's Kari Keen Coupe is in a museum and the Smithsonian's will never run, mine will be the only running Brownback Tiger C-400 left.
Back to top
View user's profile Send private message
rkammlott



Joined: 26 Jul 2004
Posts: 47
Location: Teaneck NJ

PostPosted: Fri May 25, 2012 17:46    Post subject: Reply with quote

very interesting project. looking forward to see it running. please post pictures.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    enginehistory.org Forum Index -> Collections/Restorations - General All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group