View previous topic :: View next topic |
Author |
Message |
lsmith
Joined: 21 Jan 2012 Posts: 4
|
Posted: Sat Jan 21, 2012 19:41 Post subject: Help with a Wright 3350 Compound turbo engine. |
|
|
I recently purchased this engine which was cosmolened. Im having trouble getting it to turn by way of the engine inertia starter. Will I have to wrench it from the propshaft etc? I also need a propshaft wrench. any help would be nice. I have hot washed the engine and now I feel more comfortable getting near it.
Any pictures on how to make an engine service stand?
Thanks in advance.
andrew |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ckuhns
Joined: 13 Jul 2003 Posts: 36
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
lsmith
Joined: 21 Jan 2012 Posts: 4
|
Posted: Sun Jan 22, 2012 12:20 Post subject: CR 3350 |
|
|
Carl thanks for the ebay listing URL but this wrench will not work for me. The shaft size is only 2 3/8" when the 3350 prop shaft is 4.5"
I do not know where the model number would be located so maybe you could help me there.
I also need a cylinder base screw wrench for this engine. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ckuhns
Joined: 13 Jul 2003 Posts: 36
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
rkammlott
Joined: 26 Jul 2004 Posts: 47 Location: Teaneck NJ
|
Posted: Mon Jan 23, 2012 07:50 Post subject: |
|
|
I got my canned 4360 turning by putting a propeller on with 1 blade and carefully strapped on a comealong and pulled it through. I had to soak the cylinders for a few days. There was preservative EVERYWHERE!! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|